Item type |
学術雑誌論文 / Journal Article(1) |
公開日 |
2008-03-14 |
タイトル |
|
|
タイトル |
Preparation of High Purity Zinc Oxide from Zinc Metal Scrap |
|
言語 |
en |
言語 |
|
|
言語 |
eng |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Zinc oxide |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Zinc scrap |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Pyrometallurgy |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Preparation |
主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Recycling |
資源タイプ |
|
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_6501 |
|
資源タイプ |
journal article |
アクセス権 |
|
|
アクセス権 |
open access |
|
アクセス権URI |
http://purl.org/coar/access_right/c_abf2 |
作成者 |
JIANG, Yuren
SHIBAYAMA, Atsushi
Miyazaki, Toshio
LIU, Kejun
FUJITA, Toyohisa
|
内容記述 |
|
|
内容記述タイプ |
Abstract |
|
内容記述 |
Pyrometallurgical process is utilized to recover zinc in the form of high purity zinc oxide from a kind of zinc metal scrap containing 92.49 wt% zinc. The process uses tube-type furnace, where the reactor is divided into volatilization zone and oxidization zone by flowing nitrogen gas and air. In the process, zinc is firstly volatilized to vapor in inert atmosphere of nitrogen gas and carried forward to oxidization zone by nitrogen gas, then oxidized to zinc oxide in air atmosphere. The effect of temperature, air and nitrogen gas flow-rates, and reaction time on both purity and yield of the product is investigated in detail in this study. Subsequently, the characteristics of the products are examined by X-ray diffractometer and scanning electron microscope. The obtained results demonstrated that both the purity and the yield of the product have relationships with the operation parameters. The contents of the impurities grow with the rise of temperature, with the increase of nitrogen gas or air flow-rate, and also with the extension of reaction time. However, the yield decreases with the decrease of temperature, with the reduce of nitrogen gas flow-rate, with the rise of air flow-rate, and also with the diminishment of reaction time. In addition, very low air flow-rate resulted in the increase of metallic zinc in the product and the decrease of the yield of the product at the same time. Zinc oxide with purity of 99.97 wt% and yield of 94.45% in nano-grade dimension can be obtained in presence of 300ml/min N2 flow-rate and 800ml/min air flow-rate for 12 minutes at 1253 K, whereas the impurity content of Al, Fe, Cu, Pb and Cd is 0.0072 wt%, 0.00060 wt%, 0.00096 wt%, 0.0048 wt% and 0.00031 wt%, respectively, which approaches the quality demands of the first-grade-zinc oxide in JIS (Japanese Industrial Standard) K 1410-1995. |
|
言語 |
en |
出版タイプ |
|
|
出版タイプ |
VoR |
|
出版タイプResource |
http://purl.org/coar/version/c_970fb48d4fbd8a85 |
書誌情報 |
en : International Journal of the Society of Materials Engineering for Resources
巻 11,
号 2,
p. 44-49,
発行日 2003-09-01
|
収録物識別子 |
|
|
収録物識別子タイプ |
ISSN |
|
収録物識別子 |
13479725 |
収録物識別子 |
|
|
収録物識別子タイプ |
NCID |
|
収録物識別子 |
AA1095475X |
出版者 |
|
|
出版者 |
The Society of Materilas Engineering for Resources of Japan |
|
言語 |
en |
関連情報 |
|
|
関連タイプ |
isIdenticalTo |
|
|
識別子タイプ |
DOI |
|
|
関連識別子 |
https://doi.org/10.5188/ijsmer.11.44 |