| Item type |
学術雑誌論文 / Journal Article(1) |
| 公開日 |
2008-03-12 |
| タイトル |
|
|
タイトル |
Water Resistance of Porous Carbon Materials made from Rice Hull |
|
言語 |
en |
| 言語 |
|
|
言語 |
eng |
| 主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Porous Carbon Materials |
| 主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Rice Hull |
| 主題 |
|
|
言語 |
en |
|
主題Scheme |
Other |
|
主題 |
Water Resistance |
| 資源タイプ |
|
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_6501 |
|
資源タイプ |
journal article |
| アクセス権 |
|
|
アクセス権 |
open access |
|
アクセス権URI |
http://purl.org/coar/access_right/c_abf2 |
| 作成者 |
YOSHIDA, Keigo
IIZUKA, Hiroshi
SHIBATA, Yoshihiro
UNUMA, Hidero
NAKAMURA, Toru
SHIKANO, Shujun
|
| 内容記述 |
|
|
内容記述タイプ |
Abstract |
|
内容記述 |
The authors have investigated a new utilizationof rice-hull from a viewpoint of the recycling. The rice-hull carbon-material (RHS carbon) is manufactured by mixing the rice-hull particles with a phenol resin, pressure forming, drying, and then carbonizing in the temperature range from 1173K to 1773K. Since the most of the inorganic component is Siin the rice hull, the most of the produced inorganic component in the RHS carbon is SiO2, which is stable under wet or water-ret conditions. Therefore, the RHS carbon is expected to be a high water-resistant material. In this study, the authors measure the compressive strength of the RHS carbon after water immersing and hygroscopic expansion in a deionized water. The compressive strength did not decrease after the water immersing. Moreover, the hygroscopic expansion of the RHS carbon was considerably low. These results clearly showed the advantage of the RHS carbon, comparing to the similar porous carbon materials made from rice bran. |
|
言語 |
en |
| 内容記述 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
ICMR2005 |
|
言語 |
en |
| 出版タイプ |
|
|
出版タイプ |
VoR |
|
出版タイプResource |
http://purl.org/coar/version/c_970fb48d4fbd8a85 |
| 書誌情報 |
en : International Journal of the Society of Materials Engineering for Resources
巻 13,
号 2,
p. 49-53,
発行日 2006-03-01
|
| 収録物識別子 |
|
|
収録物識別子タイプ |
PISSN |
|
収録物識別子 |
1347-9725 |
| 収録物識別子 |
|
|
収録物識別子タイプ |
NCID |
|
収録物識別子 |
AA1095475X |
| 出版者 |
|
|
出版者 |
The Society of Materilas Engineering for resources of Japan |
|
言語 |
en |
| 関連情報 |
|
|
関連タイプ |
isIdenticalTo |
|
|
識別子タイプ |
DOI |
|
|
関連識別子 |
https://doi.org/10.5188/ijsmer.13.49 |
ijsmer13-2e.pdf (1.5 MB)
