| Item type |
紀要論文 / Departmental Bulletin Paper(1) |
| 公開日 |
2008-01-29 |
| タイトル |
|
|
タイトル |
高強度アルミニウム共晶系鋳造合金の開発 |
| その他のタイトル |
|
|
その他のタイトル |
Development of High Strength Aluminum Eutectic Cast Alloys |
| 言語 |
|
|
言語 |
jpn |
| 主題 |
|
|
主題Scheme |
Other |
|
主題 |
高強度アルミニウム |
| 主題 |
|
|
主題Scheme |
Other |
|
主題 |
鋳造合金 |
| 資源タイプ |
|
|
資源タイプ識別子 |
http://purl.org/coar/resource_type/c_6501 |
|
資源タイプ |
departmental bulletin paper |
| 作成者 |
小松, 芳成
後藤, 正治
麻生, 節夫
Komatsu, Yoshinari
Goto, Shoji
Aso, Setsuo
|
| 内容記述 |
|
|
内容記述タイプ |
Other |
|
内容記述 |
Aluminum alloys are one of the most widely used structural materials because of their good mechanical properties. Recently, however, more high strength and more high creep resistant materials are required in industry such as air space industry. The aim of this work is to develop a new high strength Al-base eutectic casting alloy made by commercial foundry technique. As an example, an Al-12.7 mass% Ce-5.5 mass% Ni-0.56 mass% Zr alloy was adopted for age hardening cast alloy, on which the age hardening behavior was studied and the hardening mechanism was discussed. The alloy showed clear age hardening behavior and the hardeness reached a peak value of 108.6 Hv for aging of 500 h at 573 K, which was about two times higher than that of as-cast state in the Al-12 mass% Ce-5 mass% Ni eutectic cast alloy. The hardening mechanism was presumed to be due to Al₃Zr precipitation in the Al matrix phase. Finally, the Al-12.7 mass%Ce-5.5 mass% Ni-0.56 mass% Zr alloy was concluded to be a good candidate for new Al-base structural materials. |
| 出版タイプ |
|
|
出版タイプ |
VoR |
|
出版タイプResource |
http://purl.org/coar/version/c_970fb48d4fbd8a85 |
| 書誌情報 |
秋田大学工学資源学部研究報告
en : Scientific and technical reports of Faculty of Engineering and Resource Science,Akita University
巻 28,
p. 25-30,
発行日 2007-10-31
|
| ISSN |
|
|
収録物識別子タイプ |
ISSN |
|
収録物識別子 |
13457241 |
| NCID |
|
|
収録物識別子タイプ |
NCID |
|
収録物識別子 |
AA11410906 |
| 出版者 |
|
|
出版者 |
秋田大学工学資源学部 |
koushi28d.pdf (1.3 MB)
