@article{oai:air.repo.nii.ac.jp:00001322,
 author = {大塚, 健治 and 田上, 道弘 and 武藤, 侃 and OTSUKA, Kenji and TAGAMI, Michihiro and MUTOU, Akira},
 issue = {1/2},
 journal = {素材物性学雑誌},
 month = {Dec},
 note = {Effects of active filler metal composition on the shear strength and reaction
products of Al203 - Hovar joints were studied. The variation of microstructures
of reaction products formed at the interface between AI,03 and active filler metal
was investigated by scanning electron microscopy, auger electron microscopy.
Increasing of Cu component in the active filler metal (Ag-35mass%Cu-
2mass%Ti) improves shear strength about 21O-240MPa of AI,03 - Kovar joints
brazed at 1123K for 900s and thickness change of active filler metal do not influenced
on the shear strength of ALO, - Kovar joint.Reaction layer Ti2.9 (Cu,
Al）1.9 01.3 were formed in the interface between active filler metal and A1203. High
shear strengh of Al203 - Kovar joints are attributed to the formation of these
reaction layers.},
 pages = {3--7},
 title = {Ag-35mass%Cu-2mass%Tiの活性金属ろうによるアルミナとコバールの接合},
 volume = {12},
 year = {1999}
}